Home / STOCK ROM / ODIN PROCEDURE WITH FIRMWARE FRM XDA FOR GALAXY Y

ODIN PROCEDURE WITH FIRMWARE FRM XDA FOR GALAXY Y

Posted by Unknown Selasa, 25 September 2012 0 komentar

Odin Guide on How to Flash and Install stock ROM Firmware on Samsung Galaxy Y S5360(THANKS TO XDA)

How to use Odin in flashing the stock ROM on Samsung Galaxy Y S5360?

Here's the procedure on how to manually install the stock ROM (firmware) on Samsung Galaxy Y GT-S5360. Flashing stock ROMs is useful in downgrading or upgrading to any available firmware versions you desired. This has been also useful for unbricking purposes for a bricked, reverting back to original stock or if you needed your device warranty back.

This guide is a bit risky for beginners and can only be used by advance users who already had an experience on how to tweak android devices firmware.
Now, this procedure is no joke and should be taken seriously for it might results to damage your phone if some mistakes might happen. We are talking about firmware flashing here, one false move or any interruption will take your device into serious situation that is not too easy to recover.Your phone is not a toy for us, but it is your personal property, you are the only one who can decide on what to do about it.

Disclaimer: We shall not be held responsible if anything happens to your device by following this guide. Proceed at your own risk!

Needed files and tools
Stock ROM
Odin Multi-downloader----- download
PIT file
Driver
USB cable
PC or laptop
Samsung Galaxy Y GT-S5360

Preparation before Flashing
Back-up all of your important data stored in the phone like contacts, messages and etc. Flashing will wipe and delete all of it.
Ensure that your phone is fully charge or above 80% charge. (If your phone had an auto-shutdown history, and its too old, use a newer or good working battery.
Remove the SIM card and the external memory card. (not necessarily but recommended to avoid any certain issues)
Disable and Close Antivirus, Kies and any running software windows.
Hard Reset - We often do hard reset before flashing to clean the memory cache of the phone. Master reset code*2767*3855# .

ODIN Flashing Procedures for Samsung S5360 Galaxy Y
1. Run the ODIN Downloader v1.84 on your PC desktop.
2. Load the firmware binary files on each designated button spaces.

How to Flash with Multiples files with Pit, Bootloader, PDA, PHONE/MODEM and CSC file
This is full flashing and useful for unbricking for it has a full packaged with individual file allocations, this type of files we often used to fix a bricked Samsung Android devices. Some firmware updates have like this one and some are came into just a single file packaged.

Click on each button and load the appropiate file unto it.
Pit Button - select and load the totoro_0623.pit

Bootloader - look for the file with the word Boot,
like DefaultCalDataWithBoot_S5360XXXXX_REV05.tar.md5

PDA button - look for the file with the letters PDA or CODE on it,
like PDA_S5360XXXXX_REV05.tar.md5

PHONE button- look with the word MODEM file,
like MODEM_S5360XXXXX_REV05.tar.md5

CSC button - associated also with letters CSC or Multi_CSC,
like GT-S5360-MULTI-CSC-OXXXXX.tar.md5

There are three checkboxes on the left side of ODIN, the Re-Partition, Auto Reboot and F.Reset Time.
The Auto Reboot and F.Reset Time are often always checked in flashing while the Re-Partition will only be checked if you want to fix the memory partition of the phone, now if you'll only want to upgrade or downgrade DO NOT CHECK THE REPARTITION.

DO NOT CHECK RE-PARTITION - Safety for Upgrade and Downgrade

Full Flashing with RE-PARTITION enabled - Advisable only for fixing Soft bricked devices

How to Flash with Only a Single file.
Some files came only in a single packed like with tar.md5 file extension., and a 'SS_DL.dll' file also included on it. Others are confused where to put this file. Well, the S5360XXXXX_S5360XXXXX_S5360XXXXX_HOME.tar.md5 goes to the PDA button section while the 'DLL' file in not to be used but don't delete it, a dll file means a driver.
Again the "Repartition" check-box is not to be tick, only the Auto-Reboot and F.Reset Time are checked.

Setting up the Samsung Galaxy Y into Download Mode and Connecting to PC.
You need to set the device into download mode in order to let Odin recognize it. To set into download mode
Turn OFF the phone, then hold and press the three buttons Volume Down + Home + Power Key simultaneously. If you'll still not get into download mode, remove the battery a couple of seconds then put it back again and then press the download mode button combination again.

Once the phone displays the Android robot and says "Downloading..." Connect the phone to PC with the supplied USB cable. Odin will automatically recognize it if it's properly connected, the ID:COM mapping will highlight to color yellow and says "added" on the log box.

Start Flashing
Hit the "Start" Button when all are set perfectly to begin flashing.

CAUTION: Avoid touching the phone while the flashing already started, any interruption will result into serious issues like soft-brick or hard-brick.

Let the flashing completes, a progress bar displays until the firmware downloading process finishes. It only takes around 3 to 5 minutes, depends of your PC speed.
When a word "PASS" appears, it means that the flashing is successful. The phone will then reboot and after completely rebooted it is then safe to remove it from computer's connection.

Do a hard reset again by the code *2767*3855# or in recovery mode hold and press Volume UP+Home+Power key. Navigate to the Wipe Data cache/Factory Reset.
Some other tweaks:
1) To check your recent firmware info *#1234#
2) CSC configuration - IMEI number check [*#06#]
3) *#272*[IMEInumber]#
4) Choose sales code

NOTE>>>>>
SOMETIMES 3 FILES ARE ONLY PROVIDED IN TAT CASE----------

- Browse the 3 tar files to odin PDA=PDA_xxxx.tar, PHONE=MODEM_ or PHONE_xxxxx.tar, CSC=CSC_xxxxx.tar
- no PIT and/or BOOT files required - leave it empty!
- leave all other fields and checkboxes default!
- connect your phone, You must see yellow 0:[COMxx] in the first ID:COM and "Added" in the message box
- Start flashing by the START button.
- flashing will start immediately, see the progress in the message box, and progress bar on the phone
- Wait 1-3 minutes, until green PASS! in the upper left
- SGY will reboot, leave it as is for 2-5 minutes until startup finishes

So here are the bundles:

(format: PHONE / CSC / MODEM versions)

EUROPE
S5360_XXKK6_OXXKK2_XXKK5
European multilanguage build.
based on: S5360XXKK6_S5360OXXKK2_RST_S5360XXKK5_HOME.tar.md5
ro.build.date=Wed Nov 23 21:52:07 KST 2011
ro.build.version.release=2.3.6
Supported languages:
XX = de,en,es,fr,hu,it,nl,pt(cs,da,el,fi,no,pl,sl,sv,tr )
Included CSCs: (Default is XEU)
ATO AUT COS CPW CYO CYV EIR EUR FOP ITV MOO PAN PHE SUW TPH XEF XEH XEO XEU XEZ XSK
This build does not contains any provider specific bloatware.

S5360_XXKK6_VDHKK1_XXKK5
Vodafone Hungary branded
based on: S5360XXKK6_S5360VDHKK1_S5360XXKK5_HOME.tar.md5
ro.build.date=Wed Nov 23 21:52:07 KST 2011
Supported region: VDH only

S5360_XXKL3_OXXKL1_XXKL3
European multilanguage build.
based on: S5360XXKL3_S5360OXXKL1_RST_S5360XXKL3_HOME.tar.md5
ro.build.date=Wed Dec 14 17:16:14 KST 2011
Supported languages:
XX = de,en,es,fr,hu,it,nl,pt(cs,da,el,fi,no,pl,sl,sv,tr )
Included CSCs: (Default is XEU)
ATO AUT COS CPW CYO CYV EIR EUR FOP ITV MOO PAN PHE SUW TPH XEF XEH XEO XEU XEZ XSK
After the flash, set your country/provider in dialer *#272*[yourIMEI]# (-> It will wipe your data, and rebrand the phone to specific country/carrier)
This build does not contais any provider specific bloatware.

CSC only:S5360_OXFKL3
This is an OXF CSC file only!!!
included regions:
CNX COA ERO GBL MOT MSR MTL PMN SIM TMT TOP TRA
The pack includes region specific settings, and Swype keyboard for the following languages:
EnglishUK, EnglishUS, Bulgarian, Croatian, Danish, Dutch, Finnish, French, German, Korean, Norwegian, Romanian, SerbianLA, Slovenian, Swedish
You may use other parts of S5360_XXKL3_OXXKL1_XXKL3 from above!

S5360_XXLA2_OXXLA2_XXLA2
European multilanguage build.
based on: S5360XXLA2_S5360OXXLA2_RST_S5360XXLA2_HOME.tar.md5
ro.build.date=Wed Jan 11 13:58:09 KST 2012
Supported languages:
XX = de,en,es,fr,hu,it,nl,pt(cs,da,el,fi,no,pl,sl,sv,tr )
Included CSCs: (Default is XEU)
ATO AUT COS CPW CYO CYV EIR EUR FOP ITV MOO PAN PHE SUW TPH XEF XEH XEO XEU XEZ XSK
After the flash, set your country/provider in dialer *#272*[yourIMEI]# (-> It will wipe your data, and rebrand the phone to specific country/carrier)
This build does not contains any provider specific bloatware.

S5360_XXLA4_DBTKK1_XXLA4
European multilanguage build.
based on: S5360XXLA4_S5360DBTKK1_S5360XXLA4_HOME.tar.md5
ro.build.date=Wed Jan 25 14:24:48 CET 2012
ro.build.version.release=2.3.6
Supported languages:
XX = de,en,es,fr,hu,it,nl,pt(cs,da,el,fi,no,pl,sl,sv,tr )
Included CSCs: DBT only (Supported networks: T-Mobile D, Vodafone.de, E-Plus, o2 - de)

This build does not contains any provider specific bloatware.
S5360_XXLC1_ATOLB1_XXLC1
European multilanguage build.
based on: S5360XXLC1_S5360ATOLB1_S5360XXLC1_HOME.tar.md5
ro.build.date=Tue Mar 6 17:24:32 KST 2012
ro.build.version.release=2.3.6
ro.build.changelist=1012072
Supported languages:
XX = de,en,es,fr,hu,it,nl,pt(cs,da,el,fi,no,pl,sl,sv,tr )
Included CSCs: ATO only
Supportd network setups:
Austria: A1, bob, T-Mobile A, Orange AT, tele.ring, 3, yesss!, aon

This build contains some provider specific bloatware.
S5360_XXLD5_OXXLD5_XXLD5
European multilanguage build.
Wipe package
based on: S5360XXLD5_S5360OXXLD5_RST_S5360XXLD5_HOME.tar.md5
ro.build.version.release=2.3.6
ro.build.date=Wed Apr 25 16:30:22 KST 2012
ro.build.changelist=1103396
Supported languages:
XX = de,en,es,fr,hu,it,nl,pt(cs,da,el,fi,no,pl,sl,sv,tr )
Included CSCs: (Default is AUT, XEU missing!)
AUT CMF COS CYO CYV EUR FOP ITV PAN PHE SMO SUW TPH XEF XEH XEO XEZ XSK
After the flash, set your country/provider in dialer *#272*[yourIMEI]# (-> It will wipe your data, and rebrand the phone to specific country/carrier)
This build does not contains any provider specific bloatware.
S5360_XXLE1_OXXLE1_XXLE1
European multilanguage build.
Wipe package
Based on: S5360XXLE1_S5360OXXLE1_RST_S5360XXLE1_HOME.tar.md5
ro.build.version.release=2.3.6
ro.build.date=Thu May 3 14:19:52 KST 2012
ro.build.changelist=1111664

Supported languages:
XX = de,en,es,fr,hu,it,nl,pt(cs,da,el,fi,no,pl,sl,sv,tr )
Included CSCs: (Default is AUT, XEU missing!)
AUT CMF COS CYO CYV EUR FOP ITV PAN PHE SMO SUW TPH XEF XEH XEO XEZ XSK
After the flash, set your country/provider in dialer *#272*[yourIMEI]# (-> It will wipe your data, and rebrand the phone to specific country/carrier)
This build does not contains any provider specific bloatware.
CSC Only: OXF CSC for XXLE1 (S5360)

Included carrier setup for countries: Bosnia, Bulgaria, Croatia, Montenegro, Romania, Serbia, Slovenia
And Swype keyboard for : EnglishUK, EnglishUS, Bulgarian, Croatian, Danish, Dutch, Finnish, French, German, Korean, Norwegian, Romanian, SerbianLA, Slovenian, Swedish

Use conjunction with XXLE1_OXX, but replace the CSC file!
S5360_XXLF1_OXXLF1_XXLF1
European multilanguage build.
Wipe package

Based on: S5360XXLF1_S5360OXXLF1_RST_S5360XXLF1_HOME.tar.md5
ro.build.version.release=2.3.6
ro.build.date=Thu Jun 7 18:04:19 KST 2012
ro.build.changelist=1142401

Supported languages:
XX = de,en,es,fr,hu,it,nl,pt(cs,da,el,fi,no,pl,sl,sv,tr )
Included CSCs: (Default is AUT, XEU missing!)
AUT CMF COS CYO CYV EUR FOP ITV PAN PHE SMO SUW TPH XEF XEH XEO XEZ XSK
After the flash, set your country/provider in dialer *#272*[yourIMEI]# (-> It will wipe your data, and rebrand the phone to specific country/carrier)
This build does not contains any provider specific bloatware.
S5360_XXLF3_OXXLF3_XXLF3
European multilanguage build.
Wipe package

Based on: S5360XXLF3_S5360OXXLF3_RST_S5360XXLF3_HOME.tar.md5
ro.build.version.release=2.3.6
ro.build.date=Wed Jun 27 10:45:25 KST 2012
ro.build.changelist=1157453

Supported languages:
XX = de,en,es,fr,hu,it,nl,pt(cs,da,el,fi,no,pl,sl,sv,tr )
Included CSCs: (Default is AUT. XEU missing!)
AUT CMF COS CYO CYV EUR FOP ITV PAN PHE SMO SUW TPH XEF XEH XEO XEZ XSK
After the flash, set your country/provider in dialer *#272*[yourIMEI]# (-> It will wipe your data, and rebrand the phone to specific country/carrier)
This build does not contains any provider specific bloatware.
S5360_XXLH2_OXXLH2_XXLH2
European multilanguage build.
Wipe package

Based on: S5360XXLH2_S5360OXXLH2_RST_S5360XXLH2_HOME.tar.md5
ro.build.version.release=2.3.6
ro.build.date=Thu Aug 30 15:16:00 KST 2012
ro.build.changelist=1190009

Supported languages:
XX = de,en,es,fr,hu,it,nl,pt(cs,da,el,fi,no,pl,sl,sv,tr )*
Included CSCs: (Default is AUT)
AUT CMF COS CYO CYV EUR ORS PAN SMO SUW TPH TSH XEH XEO XEZ XSK
After the flash, set your country/provider in dialer *#272*[yourIMEI]# (-> It will wipe your data, and rebrand the phone to specific country/carrier)
This build does not contains any provider specific bloatware.
ASIA / PACIFIC
S5360_DDLA3_ODDLA2_DDLA2 (revision 1)
corrected CSC if you have the zero release, download this one only
Bangladesh, India, Nepal, Sri Lanka
based on: S5360DDLA3_S5360ODDLA2_S5360DDLA2_HOME.tar.md5
ro.build.date=Wed Jan 18 17:46:48 KST 2012

Included CSCs:
ETR INS INU NPL SLK TML
Included languages:
DD = en(hi)
This build does not contain provider specific bloatware.
(some SD card issues reported with this build -> I suggest to format your SD to FAT32)
S5360_DDLC2_ODDLA2_DDLC2
Bangladesh, India, Nepal, Sri Lanka
based on: S5360DDLC2_S5360ODDLA2_S5360DDLC2_HOME.tar.md5
ro.build.version.release=2.3.6
ro.build.date=Tue Mar 20 12:52:45 KST 2012

Included CSCs:
ETR INS INU NPL SLK TML
Included languages:
DD = en(hi)
This build does not contain provider specific bloatware.
S5360_DDLE1_ODDLD1_DDLE1
Bangladesh, India, Nepal, Sri Lanka
WIPE package
Based on: S5360DDLE1_S5360ODDLD1_S5360DDLE1_HOME.tar.md5
ro.build.version.release=2.3.6
ro.build.date=Fri May 4 19:14:23 KST 2012

Included CSCs:
ETR INS INU NPL SLK TML
Included languages:
DD = en(hi)
This build does not contain provider specific bloatware.
S5360_DDLF2_ODDLF1_DDLF1
Bangladesh, India, Nepal, Sri Lanka
WIPE package
Based on: S5360DDLF2_S5360ODDLF1_S5360DDLF1_HOME.tar.md5
ro.build.version.release=2.3.6
ro.build.date=Fri Jun 22 21:18:27 KST 2012

Included CSCs:
ETR INS INU NPL SLK TML
Included languages:
DD = en(hi)
This build does not contain provider specific bloatware.
S5360_DXKL2_OLBKL2_DXKL2
Indonesia, Malaysia, Philippines, Singapore, Vietnam
based on: S5360DXKL2_S5360OLBKL2_S5360DXKL2_HOME.tar.md5
ro.build.date=Thu Dec 15 19:22:01 KST 2011
Included CSCs:
GLB MM1 SIN SMA STH THL XEV XME XSE XSP XTC XTE
Included languages:
DX = en,id,ms,th,vi,zh(ta)
This build contains some provider specific bloatware, depending on your CSC selection.
S5360_DXLA1_OLBLA1_DXLA1
Indonesia, Malaysia, Philippines, Singapore, Vietnam
based on: S5360DXLA1_S5360OLBLA1_S5360DXLA1_HOME.tar.md5
ro.build.date=Thu Jan 12 20:25:01 KST 2012
Included CSCs:
GLB MM1 SIN SMA STH THL XEV XME XSE XSP XTC XTE
Included languages:
DX = en,id,ms,th,vi,zh(ta)
This build contains some provider specific bloatware, depending on your CSC selection.
S5360_DXLB1_XSELB1_DXLB1
Indonesia, Malaysia, Philippines, Singapore, Vietnam
based on: S5360DXLB1_S5360XSELB1_S5360DXLB1_HOME.tar.md5
ro.build.date=Fri Feb 3 13:52:03 KST 2012
ro.build.version.release=2.3.6
Included CSCs:
XSE only (Use DXLA1's CSC for rebranding)
Included languages:
DX = en,id,ms,th,vi,zh(ta)
This build contains some provider specific bloatware, depending on your CSC selection.
S5360_DXLC1_OLBLA1_DXLC1
Indonesia, Malaysia, Philippines, Singapore, Vietnam
based on: S5360DXLC1_S5360OLBLA1_S5360DXLC1_HOME.tar.md5
ro.build.date=Wed Mar 7 09:53:45 KST 2012
ro.build.version.release=2.3.6
Included CSCs:
GLB MM1 SIN SMA STH THL XEV XME XSE XSP XTC
Included languages:
DX = en,id,ms,th,vi,zh(ta)
This build contains some provider specific bloatware, depending on your CSC selection.
S5360_DXLE1_OLBLD2_DXLE1
Indonesia, Malaysia, Philippines, Singapore, Vietnam
Wipe package
Based on: S5360DXLE1_S5360XSELB1_S5360DXLE1_HOME.tar.md5
ro.build.version.release=2.3.6
ro.build.date=Fri May 4 19:35:02 KST 2012
Included CSCs:
GLB MM1 SIN SMA STH THL XEV XME XSE XSP XTC
Included languages:
DX = en,id,ms,th,vi,zh(ta)
This build contains some provider specific bloatware, depending on your CSC selection.
S5360_DXLF2_OLBLG1_DXLF1
Indonesia, Malaysia, Philippines, Singapore, Vietnam
Wipe package
Based on: S5360DXLF2_S5360OLBLG1_S5360DXLF1_HOME.tar.md5
ro.build.version.release=2.3.6
ro.build.date=Fri Jun 22 21:05:16 KST 2012
Included CSCs:
GLB MM1 SIN SMA STH THL XEV XME XSE XSP XTC, XTE
Included languages:
DX = en,id,ms,th,vi,zh(ta)
This build contains some provider specific bloatware, depending on your CSC selection.
(SOUTH) AMERICA
S5360B_UTKI3_ZTAKI3_UTKI3
Brazil
based on: S5360BUTKI3_S5360ZTAKI3_S5360BUTKI3_HOME.tar.md5
ro.build.date=Thu Sep 22 13:27:09 KST 2011
ro.build.version.release=2.3.5

Included CSCs:
ZTA only (Claro)
Included languages:
UT = en,es,pt
This build contains some provider specific bloatware.
S5360B_UTKJ2_ZTOKJ1_UTKJ1
Brazil
based on: S5360BUTKJ2_S5360ZTOKJ1_S5360BUTKJ1_HOME.tar.md5
ro.build.date=Fri Oct 7 23:45:59 KST 2011
ro.build.version.release=2.3.5

Included CSCs:
ZTO (Open Brasil)
supported carriers: Oi, TIM, Claro, VIVO, Brasil Telecom, Amazônia Celular, Sercomtel, CTBC, AEIOU
Included languages:
UT = en,es,pt
This build contains some provider specific bloatware.
S5360B_UTKL2_ZTOKL2_UTKL2
Brazil
based on: S5360BUTKL2_S5360BZTOKL2_S5360BUTKL2_HOME.tar.md5
ro.build.date=Wed Dec 21 20:13:51 KST 2011
ro.build.version.release=2.3.6

Included CSCs:
ZTO (Open Brasil)
supported carriers: Oi, TIM, Claro, VIVO, Brasil Telecom, Amazônia Celular, Sercomtel, CTBC, AEIOU
Included languages:
UT = en,es,pt
This build contains some provider specific bloatware.
S5360B_UTLC2_ZTOLC_UTLC
Brazil
based on:
ro.build.version.release=2.3.6
ro.build.date=Fri Mar 16 01:26:41 KST 2012

Included CSCs:
ZTO (Open Brasil)
supported carriers: Oi, TIM, Claro, VIVO, Brasil Telecom, Amazônia Celular, Sercomtel, CTBC, AEIOU
Included languages:
UT = en,es,pt
This build contains some provider specific bloatware.
S5360L_UHKL1_CHLKL1_UHKL1
Chile
based on: S5360LUHKL1_S5360CHLKL1_S5360LUHKL1_HOME.tar.md5
ro.build.date=Thu Dec 1 15:02:14 KST 2011
ro.build.version.release=2.3.6

Included CSCs:
CLH
Included languages:
UH = en,es
This build contains some provider specific bloatware.
(please note, not tested yet. Pls report if it's OK or not!)

S5360L_UHKI6_UUBKI4_UHKI6
Trinidad and Tobago
based on: S5360LUHKI6_S5360UUBKI4_S5360LUHKI6_HOME.tar.md5
ro.build.date=Wed Sep 21 18:13:38 KST 2011
ro.build.version.release=2.3.5

Included CSCs:
TDR TTT VNO
Included languages:
UH = en,es
This build contains some provider specific bloatware.
(please note, not tested yet. Pls report if it's OK or not!)
MIDDLE EAST and AFRICA
S5360_JPLA1_OJPLA1_XXLA2
Arabic release
based on: S5360JPLA1_S5360OJPLA1_S5360XXLA2_HOME.tar.md5
ro.build.date=Sat Jan 14 06:54:01 KST 2012
ro.build.version.release=2.3.6

Included CSCs:
ABS AFG BTC EGY JED KSA MAT MED MID MMC MRT MWD OTU PAK THR TMC TUN WAN XSG XSS

Included languages:
JP = ar,en,fr(fa,ur)
This build contains some provider specific bloatware.
S5360JPLC1/S5360OJPLC1/S5360XXLC1
Arabic release
based on: S5360JPLC1_S5360OJPLC1_S5360XXLC1_HOME.tar.md5
ro.build.version.release=2.3.6
ro.build.date=Fri Mar 16 15:45:06 KST 2012

Included CSCs:
ABS AFG BTC EGY JED KSA MAT MED MID MMC MRT MWD OTU PAK THR TMC TUN WAN XSG XSS

Included languages:
JP = ar,en,fr(fa,ur)
This build contains some provider specific bloatware.
S5360_JPLG1_OJPLG1_XXLF3
Arabic release
based on: S5360JPLG1_S5360OJPLG1_S5360XXLF3_HOME.tar.md5
ro.build.version.release=2.3.6
ro.build.date=Tue Jul 10 11:45:03 KST 2012

Included CSCs:
ABS AFG BTC EGY JED KSA MAT MED MID MMC MRT MWD OTU PAK THR TMC TUN WAN XSG XSS

Included languages:
JP = ar,en,fr(fa,ur)
This build contains some provider specific bloatware.

S5360_XXKL1_OJCKI1_XXKL1
South Africa
based on: S5360XXLC1_S5360ATOLB1_S5360XXLC1_HOME.tar.md5
ro.build.version.release=2.3.6
ro.build.date=Thu Dec 8 15:06:21 KST 2011

Included CSCs:
XFA XFC XFE XFM XFV

Included languages:
XX = de,en,es,fr,hu,it,nl,pt(cs,da,el,fi,no,pl,sl,sv,tr )
This build contains some provider specific bloatware.

TERIMA KASIH ATAS KUNJUNGAN SAUDARA

Judul: ODIN PROCEDURE WITH FIRMWARE FRM XDA FOR GALAXY Y
Ditulis oleh Unknown
Rating Blog 5 dari 5

Semoga artikel ini bermanfaat bagi saudara. Jika ingin mengutip, baik itu sebagian atau keseluruhan dari isi artikel ini harap menyertakan link dofollow ke https://androidpopuler.blogspot.com/2012/09/odin-procedure-with-firmware-frm-xda.html. Terima kasih sudah singgah membaca artikel ini.